UV Powder System Design

If you are thinking a UV curable powder coating is right for you, we can help you get started. We work directly with companies interested in evaluating or modifying their current finishing process or are looking to install their own new UV cured powder coating system.

We guide you through the entire process, from the initial design to the recommendation and selection of equipment, to the final system installation. We also offer on-going system support.

What Equipment Would Be Required?

Every application system and system layout will vary, but below we have listed the basic suggested equipment.

  • Pretreatment Station
    • Washer and conversion coating for metals
    • Preheat oven for wood products
    • Additional pretreatment may be required for non-conductive substrates
  • Application System/Environmental Room
    • Spray Booth
    • Powder Application Equipment – Tribo or Corona
  • Melt/Flow Oven
    • IR/Convection
    • Induction
  • UV Oven for Cure
    • Microwave Lamps
    • UV LED Arrays
  • Conveyor System

UV Powder Coating System Layout Example

UV Powder Coating System Layout Example from Keyland Polymer

What Equipment Would Be Required?

Every application system and system layout will vary, but below we have listed the basic suggested equipment.

  • Pretreatment Station
    • Washer and conversion coating for metals
    • Preheat oven for wood products
    • Additional pretreatment may be required for non-conductive substrates
  • Application System/Environmental Room
    • Spray Booth
    • Powder Application Equipment – Tribo or Corona
  • Melt/Flow Oven
    • IR/Convection
    • Induction
  • UV Oven for Cure
    • Microwave Lamps
    • UV LED Arrays
  • Conveyor System

UV Powder Coating System Layout Example

UV Powder Coating System Layout Example from Keyland Polymer